Please contact our Customer Centre for pricing information 0800 100 123
Flexi-N Protect is a coated urea product designed for mixing with superphosphate for spreading in a single application. Flexi-N Protect contains 300ppm active ingredient (NBPT) that slows down the conversion of nitrogen in urea to ammonia gas (ammonia volatilisation) which is lost to the atmosphere as a greenhouse gas.
North Island only
Magnesium coated urea (5% coating of magnesium oxide).
Although Flexi-N Protect has been designed for mixes, it is not compatible with: Magnesium oxide, copper sulphate, cobalt sulphate and superphosphate that is immature or not properly cured.
Flexi-N Protect can be compatible with the following under certain circumstances: Superphosphate and Sulphur Super 30.
Segregation may occur when mixed with product with differences of particle size. This should be considered by the applicator when determining the appropriate bout width for spreading product blends of this nature and Ravensdown recommends the equipment and the operation thereof should at least meet the Spreadmark™ minimum performance.
Flexi-N Protect is used to apply nitrogen, phosphate, potassium and sulphate in a single application by mixing at the desired ratio with superphosphate based products.
When used appropriately Flexi-N Protect blends are safe for aerial spreading (unlike urea/super mixes) but care should always be exercised by the pilot to check the condition of the product before loading the aircraft.
Flexi-N blends can be used with phosphate fertilisers for capital or maintenance applications in dairy, sheep and beef and cropping situations.
Actual spreading rates will vary according to farm type, climate, productivity and soil type. Soil testing and fertiliser plans are available to ensure you use the right product at the correct rate. Call our Customer Centre for information.
Avoid direct contact with seed.
Do not load Flexi-N Protect mixes into trucks with wet decks.
If your local applicator has not used Flexi-N you may advise them that if the back of their truck is wet when spreading, the magnesium coating can stick to the bin and spinners and once this is dry it is very difficult to clean off.
Flexi-N Protect products can be stored for one week, as long as they are kept in a cool, dry, well ventilated area. However, it is best to mix Flexi-N Protect with superphosphate as close to the time of application as possible.
Flexi-n mixes should preferably be supplied in bulk. Any bagged product should be bagged and applied within 48 hours